Skip to content

FrosthubUSA is now Cool Mini Splits. Same company, old name.

  1. Home
  2. Mini splits by state
  3. Oregon

Mini splits by state

Mini splits in Oregon

What Oregon’s mild coast and colder inland winters mean when you pick a mini split.

By the Cool Mini Splits teamUpdated

OregonThe Beaver State

Is a mini split worth it in Oregon?

Short answer: Yes, for most Oregon homes. Portland logs about 379 cooling hours and 2,681 heating hours a year (ENERGY STAR), so it works as the heater first and the air conditioner in summer. The last ten winters reached −14°F in Bend (Redmond), colder than the −13°F the DIY series heat at, so keep a backup heat source for the coldest nights there. Power costs 15.9¢ per kWh; for the lowest bill, pick DIY 5th Gen. Size each room with the standard chart and go one size up for west-facing or top-floor rooms.

15.9¢Average Oregon home power price per kWh (EIA, Aug 2026)
95.5°FSummer design high in Medford, the hottest in Oregon
6.1°FWinter design low in Bend (Redmond), the coldest in Oregon
FREEShipping to Oregon, 3 to 7 business days by freight

Oregon by region

Oregon has two kinds of weather for a mini split. The table shows the numbers HVAC sizing uses for each region.

PortlandEugeneMedfordBendPendleton
Two kinds of Oregon weatherHeating first Long winters, shorter summers.Backup heat Nights below −13°F in the last ten winters.
Region (climate zone)Summer highWinter lowColdest, last 10 wintersMain job
Portland (4C)87.5°F25.9°F11°FHeating first
Eugene (4C)88.3°F23.7°F13°FHeating first
Medford (4C)95.5°F23.9°F6°FHeating first
Bend (Redmond) (5B)90.7°F6.1°F−14°FHeating first, backup for cold snaps
Pendleton (5B)93.8°F8.6°F−8°FHeating first

Design temperatures: ASHRAE 2021 climatic design conditions (1% cooling, 99.6% heating dry bulb) for each airport station. Climate zones: 2021 IECC by county (PNNL guide). Coldest: NOAA station records, December 2016 to February 2026.

Heating through Oregon winters

Portland logs 2,681 full-load heating hours a year against 379 cooling hours (ENERGY STAR). A mini split moves heat in from the outside air instead of burning fuel, and the inverter runs at partial speed for most of the winter.

InsideOutside, 26°FWarm airNo flame, no fuelheat is moved, not madeHeat in
Heat moved insideEven cold air holds heat. The outdoor unit pulls it out and moves it inside, down to −13°F outside on DIY EasyPro and DIY 5th Gen.

Will it heat in a Oregon cold snap?

Down to −13°F, yes. In the last ten winters these stations went colder: Bend (Redmond) −14°F. Keep a backup heat source for the coldest nights there.

Bend (Redmond) design low6.1°FDIY Select heats down to−12°FDIY EasyPro and DIY 5th Gen−13°FBend (Redmond), coldest in 10 winters−14°F
Backup for the coldest nightsOn a design day (6.1°F in Bend (Redmond)) the mini split still heats. The backup covers the few nights below −13°F, and the DIY 5th Gen 55K multi-zone heats down to −22°F.
DIY SelectHeats down to −12°F
DIY EasyProHeats down to −13°F
DIY 5th GenHeats down to −13°F
DIY 5th Gen 55K multi-zoneHeats down to −22°F

What size for a Oregon room

Measure each room (length × width) and match it to an indoor unit.

Room sizeIndoor unitSingle zone voltage
Up to 250 sq ft6K BTU (multi-zone only)–
251–400 sq ft9K BTU115V
401–550 sq ft12K BTU115V
551–800 sq ft18K BTU230V
801–1,050 sq ft24K BTU230V
1,051–1,550 sq ft36K BTU230V
9K BTU251–400 sq ftBedroom, office12K BTU401–550 sq ftLarge bedroom18K BTU551–800 sq ftLiving room24K BTU801–1,050 sq ftGarage, shop36K BTU1,051–1,550 sq ftOpen space9K BTU251–400 sq ftBedroom, office12K BTU401–550 sq ftLarge bedroom18K BTU551–800 sq ftLiving room24K BTU801–1,050 sq ftGarage, shop36K BTU1,051–1,550 sq ftOpen space
Each square is the biggest room that size covers, drawn to scale. 6K (up to 250 sq ft) is for multi-zone only.

Go one size up for rooms with west or south windows, a top floor under the roof, high ceilings, poor insulation, or a kitchen. A garage that isn’t insulated also goes one size up. Full sizing guide

Several rooms? See multi-zone systems

What it costs to run in Oregon

Yearly cost to heat and cool one room with Portland weather, at the Oregon average power price.

SizeDIY SelectDIY EasyProDIY 5th Gen
9K$596$628$519
12K$795$769$705
18K$1,241$1,215$952
24K$1,642$1,623$1,507
36K––$2,485

Estimate, not a quote: (cooling BTU × 379 cooling hours ÷ SEER2 + heating BTU × 2,681 heating hours ÷ HSPF2) ÷ 1,000 × 15.92¢. Hours: ENERGY STAR heat pump savings calculator (Portland). Uses MRCOOL’s cold-climate rating (HSPF2 Region V). Product pages show the standard rating (Region IV), which is higher. Other cities: Eugene 261 cooling and 2,679 heating hours, Medford 534 cooling and 2,742 heating hours, Pendleton 622 cooling and 2,105 heating hours. Power price: EIA, August 2026.

DIY SelectDIY EasyProDIY 5th Gen9K$596$628$51912K$795$769$70518K$1,241$1,215$95224K$1,642$1,623$1,507
Where the savings come fromA higher SEER2 and HSPF2 move the same heat with less power. For a 12K room in Portland, DIY 5th Gen costs about $90 a year less to run than DIY Select.

What the equipment costs

Prices for complete single zone systems: outdoor unit, indoor unit, pre-charged line set and remote. Shipping is free to Oregon.

SizeDIY SelectDIY EasyProDIY 5th Gen
9K$1,249$1,487$2,329
12K$1,399$1,599$2,359
18K$1,690$1,806$2,909
24K$1,899$2,109$3,329
36K––$3,769
The systemOr the multi-zone parts
Disconnect and whip$59 and $72
Pad or wall bracketPad $172, bracket from $77
An electricianFor the circuit, if you don’t do it yourself

Rebates in Oregon

MRCOOL’s rebate data lists 7 utilities in Oregon with rebates on our DIY models, and all of them need a participating contractor, so a DIY install usually doesn’t qualify. The federal 25C tax credit ended for systems installed after December 31, 2025.

UtilityUp toWho installsSeries
Eugene Water and Electric Board (income-qualified)$4,500Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select
Oregon Heat Pump Purchase Program$2,000Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select
Pacific Power (income-qualified)$1,800Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select
Portland General Electric (PGE) (income-qualified)$1,800Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select
Salem Electric$900Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select
Blachly-Lane Electric Cooperative$800Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select
Central Electric Coop Inc$700Needs a participating contractorDIY 5th Gen, DIY EasyPro, DIY Select

Rebates checked November 2026. Amounts change; confirm with your utility.

Check your exact ZIP

DIY or a pro

MRCOOL DIY systems are built for a homeowner install: the line set comes pre-charged and connects by hand, so there’s no vacuum pump or refrigerant work. Most people hire an electrician for the new circuit, and permit rules depend on your city. Can you install a mini split yourself?

Which MRCOOL system for Oregon

Mini split questions for Oregon

Is a mini split worth it in Oregon?

For most homes, yes. It cools through Oregon summers and heats through the winter, so one system covers the whole year; keep a backup heat source for the coldest nights.

Will it keep up in a Oregon summer?

DIY EasyPro and DIY 5th Gen are rated by MRCOOL to cool with outdoor temperatures up to 122°F. Medford designs for 95.5°F.

Does it heat in a Oregon winter?

Yes. DIY Select heats down to −12°F outside and DIY EasyPro and DIY 5th Gen down to −13°F. The last ten winters went colder than that: Bend (Redmond) −14°F. Keep a backup heat source for those nights.

How much does it cost to run in Oregon?

For a 12K room with Portland weather at 15.92¢ per kWh, about $795 a year with DIY Select, $769 with DIY EasyPro and $705 with DIY 5th Gen, heating and cooling together. Estimates, not quotes.

What size do I need for a Oregon garage?

Use the same chart: measure length × width. A garage that isn’t insulated goes one size up.

Are there mini split rebates in Oregon?

Some utilities list rebates for MRCOOL DIY models; see the table above. Check each program’s rules: many need a participating contractor. The federal 25C tax credit ended for systems installed after December 31, 2025.

Can I install it myself?

Yes. The pre-charged line set connects by hand, with no vacuum pump. Most people hire an electrician for the circuit, and permit rules depend on your city.

How long does shipping to Oregon take?

Verified orders ship from Kentucky in 2 to 4 business days, then 3 to 7 by freight. Shipping is free to Oregon.

Keep reading

Not sure which size?

Call us before you buy and we'll size it with you.

+1 (844) 999-9725 Mon to Fri, 9 AM to 5 PM EST

Ready to pick your system?

Free shipping to the 48 contiguous states. Ships from Kentucky.